Quantrex Quantrex AcademyJEE · NEET · NDA PYQs with solutions Open app
JEE Main20254 Apr 2025Evening ShiftPhysicsSemiconductorsActual

Consider a n-type semiconductor in which n _ e and n _ h are number of electrons and holes, respectively. (A) Holes are minority carriers (B) The dopant is a pentavalent atom (C) n _ e n _ h n _ i ^2 (where n_i is number of electrons or holes in semiconductor when it is intrinsic form) (D) n _ e n _ h n _ i ^2 (E) The holes are not generated due to the donors Choose the correct answer from the options given below :

Options

  1. A(A), (C), (D) only
  2. B(A), (C), (E) only
  3. C(A), (B), (E) only
  4. D(A), (B), (C) only

Correct answer

C. (A), (B), (E) only

Step-by-step solution

(A) n type semiconductor holes are minority carriers and e ⁻ are majority carriers (B) Dopant are pentavalent atom. (C) n _ e n _ h = n _ i ^2 for intrinsic semiconductor (E) In n type semiconductor primary source of holes generation are thermal excitation.

Practice Semiconductors on Quantrex Academy →

More from Semiconductors

The output Y for the given inputs A and B to the circuit is: 2026Refer to the logic circuit given below. For two inputs (A=1, B=1) and (A=0, B=1) , output (Y) will be __________. 2026The maximum rated power of the LED is 2 mW and it is used in the circuit with input voltage of 5 V as shown in the figure below. The current through resistance R_S is 0.5 mA. The m 2026In a semiconductor p-n diode, the doping concentrations on p-side and n-side are 10¹⁵ atoms/cm ^3 and 10¹⁸ atoms/cm ^3 , respectively. Which one of the following statements is true 2026For the given logic circuit, which of the following inputs combination will make both LED -1 and LED -2 to glow? 2026Given below are two statements: one is labelled as Assertion A and the other is labelled as Reason R Assertion A: A diode under reverse-biased condition provides very small current 2026A diode has Zener voltage of 10 V and maximum power dissipation of 0.5 W, then the minimum resistance to be used in series with this diode for safety when it is connected to a 25 V 2026Two 4 bits binary numbers, A = 1101 and B = 1010 are given in the inputs of a logic circuit shown in figure below. The output (Y) will be: 2026 Full Semiconductors list All JEE Main PYQs