Quantrex Quantrex AcademyJEE · NEET · NDA PYQs with solutions Open app
JEE Main20249 Apr 2024Evening ShiftPhysicsSemiconductorsActual

The I-V characteristics of an electronic device shown in the figure. The device is:

Options

  1. Aa diode which can be used as a rectifier
  2. Ba zener diode which can be used as a voltage regulator
  3. Ca transistor which can be used as an amplifier
  4. Da solar cell

Correct answer

B. a zener diode which can be used as a voltage regulator

Step-by-step solution

Theory Zener diode used as voltage regulator

Practice Semiconductors on Quantrex Academy →

More from Semiconductors

The output Y for the given inputs A and B to the circuit is: 2026Refer to the logic circuit given below. For two inputs (A=1, B=1) and (A=0, B=1) , output (Y) will be __________. 2026The maximum rated power of the LED is 2 mW and it is used in the circuit with input voltage of 5 V as shown in the figure below. The current through resistance R_S is 0.5 mA. The m 2026In a semiconductor p-n diode, the doping concentrations on p-side and n-side are 10¹⁵ atoms/cm ^3 and 10¹⁸ atoms/cm ^3 , respectively. Which one of the following statements is true 2026For the given logic circuit, which of the following inputs combination will make both LED -1 and LED -2 to glow? 2026Given below are two statements: one is labelled as Assertion A and the other is labelled as Reason R Assertion A: A diode under reverse-biased condition provides very small current 2026A diode has Zener voltage of 10 V and maximum power dissipation of 0.5 W, then the minimum resistance to be used in series with this diode for safety when it is connected to a 25 V 2026Two 4 bits binary numbers, A = 1101 and B = 1010 are given in the inputs of a logic circuit shown in figure below. The output (Y) will be: 2026 Full Semiconductors list All JEE Main PYQs