Quantrex Quantrex AcademyJEE · NEET · NDA PYQs with solutions Open app
JEE Main20231 Feb 2023Morning ShiftPhysicsSemiconductorsActual

Match the List I with List II List I List II A Intrinsic Semiconductor I Fermi-level near valence band B n-type semiconductor II Fermi-level at middle of valence and conduction band C p-type semiconductor III Fermi-level near conduction band D Metals IV Fermi-level inside conduction band Choose the correct answer from the options given below:

Options

  1. A(A) → I, (B) → II, (C) → III, (D) → IV
  2. B(A) → II, (B) → I, (C) → III, (D) → IV
  3. C(A) → II, (B) → III, (C) → I, (D) → IV
  4. D(A) → III, (B) → I, (C) → II, (D) → IV

Correct answer

C. (A) → II, (B) → III, (C) → I, (D) → IV

Step-by-step solution

(A) The Fermi-level in an intrinsic semiconductor is nearly midway between the conductive and valence band.So, A → I I . (B) In the case of n-type semiconductor, the Fermi level is present just below the conduction band. So, B → I I I . (C) Fermi level in a p-type semiconductor lies close to the top of the valence band. So, C → I (D) In metals and semimetals the Fermi level lies inside at least one band i.e., inside conduction band. So, D → I V .

Practice Semiconductors on Quantrex Academy →

More from Semiconductors

The output Y for the given inputs A and B to the circuit is: 2026Refer to the logic circuit given below. For two inputs (A=1, B=1) and (A=0, B=1) , output (Y) will be __________. 2026The maximum rated power of the LED is 2 mW and it is used in the circuit with input voltage of 5 V as shown in the figure below. The current through resistance R_S is 0.5 mA. The m 2026In a semiconductor p-n diode, the doping concentrations on p-side and n-side are 10¹⁵ atoms/cm ^3 and 10¹⁸ atoms/cm ^3 , respectively. Which one of the following statements is true 2026For the given logic circuit, which of the following inputs combination will make both LED -1 and LED -2 to glow? 2026Given below are two statements: one is labelled as Assertion A and the other is labelled as Reason R Assertion A: A diode under reverse-biased condition provides very small current 2026A diode has Zener voltage of 10 V and maximum power dissipation of 0.5 W, then the minimum resistance to be used in series with this diode for safety when it is connected to a 25 V 2026Two 4 bits binary numbers, A = 1101 and B = 1010 are given in the inputs of a logic circuit shown in figure below. The output (Y) will be: 2026 Full Semiconductors list All JEE Main PYQs