Quantrex Quantrex AcademyJEE · NEET · NDA PYQs with solutions Open app
JEE Main202227 Jul 2022Morning ShiftPhysicsSemiconductorsActual

A logic gate circuit has two inputs A and B and output Y . The voltage waveforms of A , B and Y are shown below The logic gate circuit is

Options

  1. AAND gate
  2. BOR gate
  3. CNOR gate
  4. DNAND gate

Correct answer

A. AND gate

Step-by-step solution

Making Truth table of the given wave from, It is clear from the above table that the output is present when both the inputs are high. Even when any of the input is not present, the output is low. This is the function of the AND gate. Hence, the logic gate present is AND gate.

Practice Semiconductors on Quantrex Academy →

More from Semiconductors

The output Y for the given inputs A and B to the circuit is: 2026Refer to the logic circuit given below. For two inputs (A=1, B=1) and (A=0, B=1) , output (Y) will be __________. 2026The maximum rated power of the LED is 2 mW and it is used in the circuit with input voltage of 5 V as shown in the figure below. The current through resistance R_S is 0.5 mA. The m 2026In a semiconductor p-n diode, the doping concentrations on p-side and n-side are 10¹⁵ atoms/cm ^3 and 10¹⁸ atoms/cm ^3 , respectively. Which one of the following statements is true 2026For the given logic circuit, which of the following inputs combination will make both LED -1 and LED -2 to glow? 2026Given below are two statements: one is labelled as Assertion A and the other is labelled as Reason R Assertion A: A diode under reverse-biased condition provides very small current 2026A diode has Zener voltage of 10 V and maximum power dissipation of 0.5 W, then the minimum resistance to be used in series with this diode for safety when it is connected to a 25 V 2026Two 4 bits binary numbers, A = 1101 and B = 1010 are given in the inputs of a logic circuit shown in figure below. The output (Y) will be: 2026 Full Semiconductors list All JEE Main PYQs