Quantrex Quantrex AcademyJEE · NEET · NDA PYQs with solutions Open app
JEE Main2012PhysicsSemiconductorsActual

This question has Statement 1 and Statement 2. Of the four choices given after the Statements, choose the one that best describes the two Statements. Statement 1: A pure semiconductor has negative temperature coefficient of resistance. Statement 2: On raising the temperature, more charge carriers are released into the conduction band.

Options

  1. AStatement 1 is false, Statement 2 is true.
  2. BStatement 1 is true, Statement 2 is false.
  3. CStatement 1 is true, Statement 2 is true, Statement 2 is not a correct explanation of Statement 1.
  4. DStatement 1 is true, Statement 2 is true, Statement 2 is the correct explanation of Statement 1.

Correct answer

D. Statement 1 is true, Statement 2 is true, Statement 2 is the correct explanation of Statement 1.

Step-by-step solution

Temperature coefficient of resistance is negative for pure semiconductor. And no. of charge carriers in conduction band increases with increase in temperature.

Practice Semiconductors on Quantrex Academy →

More from Semiconductors

The output Y for the given inputs A and B to the circuit is: 2026Refer to the logic circuit given below. For two inputs (A=1, B=1) and (A=0, B=1) , output (Y) will be __________. 2026The maximum rated power of the LED is 2 mW and it is used in the circuit with input voltage of 5 V as shown in the figure below. The current through resistance R_S is 0.5 mA. The m 2026In a semiconductor p-n diode, the doping concentrations on p-side and n-side are 10¹⁵ atoms/cm ^3 and 10¹⁸ atoms/cm ^3 , respectively. Which one of the following statements is true 2026For the given logic circuit, which of the following inputs combination will make both LED -1 and LED -2 to glow? 2026Given below are two statements: one is labelled as Assertion A and the other is labelled as Reason R Assertion A: A diode under reverse-biased condition provides very small current 2026A diode has Zener voltage of 10 V and maximum power dissipation of 0.5 W, then the minimum resistance to be used in series with this diode for safety when it is connected to a 25 V 2026Two 4 bits binary numbers, A = 1101 and B = 1010 are given in the inputs of a logic circuit shown in figure below. The output (Y) will be: 2026 Full Semiconductors list All JEE Main PYQs