Quantrex Quantrex AcademyJEE · NEET · NDA PYQs with solutions Open app
NTA Abhyas JEE Main2020PhysicsSemiconductorsPractice

If the resistivity of pure silicon is 3000 Ω m and the mobilities of electrons and holes are 0 . 12 m 2 V - 1 s - 1 and 0 . 045 m 2 V - 1 s - 1 respectively, then what will be the resistivity of a specimen of silicon when 10 19 atoms of phosphorous are added per cubic metre?

Options

  1. A2 . 21 Ωm
  2. B3 . 21 Ωm
  3. C4 . 21 Ωm
  4. D5 . 21 Ωm

Correct answer

D. 5 . 21 Ωm

Step-by-step solution

The resistivity of pure S is given by ρ = 1 σ = 1 e n e μ e + n h μ h = 1 en 1 μ e + μ h or n 1 = 1 eρ μ e + μ n = 1 1 . 6 × 10 - 19 × 3000 ( 0 . 12 + 0 . 045 ) = 1 . 26 × 10 16 m - 3 When 10 19 atoms of phosphorous (donor atoms of valence five) are added per m 3 , the semiconductor becomes n - type semiconductor. ∴ n e - n h ≈ n e = N d = 10 19    ∵ n n = 1 . 26 × 10 16 Resitivity ρ = 1 n e μ e e = 1 1 . 6 ×

Practice Semiconductors on Quantrex Academy →

More from Semiconductors

The output Y for the given inputs A and B to the circuit is: 2026Refer to the logic circuit given below. For two inputs (A=1, B=1) and (A=0, B=1) , output (Y) will be __________. 2026The maximum rated power of the LED is 2 mW and it is used in the circuit with input voltage of 5 V as shown in the figure below. The current through resistance R_S is 0.5 mA. The m 2026In a semiconductor p-n diode, the doping concentrations on p-side and n-side are 10¹⁵ atoms/cm ^3 and 10¹⁸ atoms/cm ^3 , respectively. Which one of the following statements is true 2026For the given logic circuit, which of the following inputs combination will make both LED -1 and LED -2 to glow? 2026Given below are two statements: one is labelled as Assertion A and the other is labelled as Reason R Assertion A: A diode under reverse-biased condition provides very small current 2026A diode has Zener voltage of 10 V and maximum power dissipation of 0.5 W, then the minimum resistance to be used in series with this diode for safety when it is connected to a 25 V 2026Two 4 bits binary numbers, A = 1101 and B = 1010 are given in the inputs of a logic circuit shown in figure below. The output (Y) will be: 2026 Full Semiconductors list All NTA Abhyas JEE Main PYQs