Concepts Of Physics MCQ Edition [Volume 2]PhysicsCalorimetry

Identify which of the following pairs of physical quantities can be expressed using the same unit.

Options

AHeat and temperature
BTemperature and mole
CSpecific heat and heat
DHeat and work

Correct answer

D. Heat and work

Step-by-step solution

Heat is a form of energy, and its SI unit is Joule (J). Work is defined as the product of force and displacement, which also represents energy transfer, and its SI unit is Joule (J). Temperature is measured in Kelvin (K) or Celsius ( ^ C). Mole is the unit for the amount of substance. Specific heat capacity has the unit J/(kg K). Therefore, only heat and work can be expressed using the same unit.

Practice Calorimetry on Quantrex Academy →

More from Calorimetry

An iron cube (density = 8000 kg m ⁻³ , specific heat capacity = 470 J kg ⁻¹ K ⁻¹ ) is raised to a high temperature and placed upon a large block of ice at 0^ C . The cube melts the A traditional method of cooling drinking water is to keep it in a pitcher having porous walls. Water reaches the outer surface very slowly and evaporates. Most of the energy requir An iron piece of mass 100 g is placed inside a furnace for a long duration and subsequently dropped into a calorimeter of water equivalent 10 g that contains 240 g of water at 20^ Four 2 cm 2 cm 2 cm cubes of ice are removed from a refrigerator and placed in 200 ml of a drink at 10^ C . Determine the temperature of the drink once thermal equilibrium is reach Four 2 cm 2 cm 2 cm cubes of ice are removed from a refrigerator and placed in 200 ml of a drink at 10^ C . Determine the amount of ice melted, given that the ice cubes do not melt A mass of 1 kg of ice at 0^ C is mixed with 1 kg of steam at 100^ C . Determine the composition of the system once thermal equilibrium is established. The latent heat of fusion of An aluminium vessel of mass 0.5 kg holds 0.2 kg of water at 20^ C . A block of iron of mass 0.2 kg at 100^ C is gently placed into the water. Determine the equilibrium temperature Determine the time required to heat 20 kg of water from 10^ C to 35^ C using an immersion heater rated at 1000 W . Assume that 80 % of the power input is utilized to heat the water Full Calorimetry list All Concepts Of Physics MCQ Edition [Volume 2] PYQs