Quantrex Quantrex AcademyJEE · NEET · NDA PYQs with solutions Open app
JEE Main202124 Feb 2021Evening ShiftPhysicsSemiconductorsActual

Given below are two statements: Statement I : p - n junction diodes can be used to function as a transistor, simply by connecting two diodes, back to back, which acts as the base terminal Statement II : In the study of transistors, the amplification factor β indicates ratio of the collector current to the base current. In the light of the above statements, choose the correct answer from the options given below.

Options

  1. ABoth Statement I and Statement II are false
  2. BStatement I is true but Statement II is false
  3. CStatement I is false but Statement II is true
  4. DBoth Statement I and Statement II are true

Correct answer

C. Statement I is false but Statement II is true

Step-by-step solution

S-1 Statement 1 is false because in case of two discrete back to back connected diodes, there are four doped regions instead of three and there is nothing that resembles a thin base region between an emitter and a collector. S-2 Statement-2 is true, as β = I C I B

Practice Semiconductors on Quantrex Academy →

More from Semiconductors

The output Y for the given inputs A and B to the circuit is: 2026Refer to the logic circuit given below. For two inputs (A=1, B=1) and (A=0, B=1) , output (Y) will be __________. 2026The maximum rated power of the LED is 2 mW and it is used in the circuit with input voltage of 5 V as shown in the figure below. The current through resistance R_S is 0.5 mA. The m 2026In a semiconductor p-n diode, the doping concentrations on p-side and n-side are 10¹⁵ atoms/cm ^3 and 10¹⁸ atoms/cm ^3 , respectively. Which one of the following statements is true 2026For the given logic circuit, which of the following inputs combination will make both LED -1 and LED -2 to glow? 2026Given below are two statements: one is labelled as Assertion A and the other is labelled as Reason R Assertion A: A diode under reverse-biased condition provides very small current 2026A diode has Zener voltage of 10 V and maximum power dissipation of 0.5 W, then the minimum resistance to be used in series with this diode for safety when it is connected to a 25 V 2026Two 4 bits binary numbers, A = 1101 and B = 1010 are given in the inputs of a logic circuit shown in figure below. The output (Y) will be: 2026 Full Semiconductors list All JEE Main PYQs