Quantrex Quantrex AcademyJEE · NEET · NDA PYQs with solutions Open app
NEET2011PhysicsCurrent ElectricityActual

A galvanometer can be changed into an ammeter by using

Options

  1. Alow resistance shunt in series
  2. Blow resistance shunt in parallel
  3. Chigh resistance shunt in series
  4. Dhigh resistance shunt in parallel

Correct answer

B. low resistance shunt in parallel

Step-by-step solution

Correct option is 3 . low resistance in parallel An ammeter is always connected in series to a circuit. Since Galvanometer is a very sensitive instrument therefore it can't measure heavy currents. In order to convert a Galvanometer into an Ammeter, a very low resistance known as "shunt" resistance is connected in parallel to Galvanometer. In short To convert a galvanometer into an ammeter a low value resistance is to be connected in parallel to it called shunt.

Practice Current Electricity on Quantrex Academy →

More from Current Electricity

A potentiometer wire of 400 cm length has a resistance of 20 . It is connected in series with a resistance of 15 and a accumulator of EMF 6 V (negligible internal resistance). The 2026In the following figure current I equal to 2026The range of voltmeter is 10 V and its resistance is 50 . To convert it to a voltmeter of range 15 V , how much resistance is to be added? 2026When a galvanometer is shunted with a 2 resistance, the deflection is reduced to one-fourth. If the galvanometer is further shunted with a 1 resistance, the further reduction in de 2026A galvanometer can be converted into a voltmeter of certain range by connecting a resistance of 990 in series with it. When the resistance of 480 is connected in series, the range 2026A resistance is to be measured using a meter bridge; the student chooses the standard resistance R to be 100 . The student finds the null point at l₁=16 cm. To get the null point n 2026Which of the following statements is FALSE? A. In a balanced Wheatstone bridge, if the cell and the galvanometer are exchanged, the null point is disturbed. B. A rheostat can be us 2026A potentiometer wire has length 4 m and resistance 8 . The resistance that must be connected in series with the wire and the driving battery of e.m.f. 2 V, so as to get a potential 2026 Full Current Electricity list All NEET PYQs