Quantrex Quantrex AcademyJEE · NEET · NDA PYQs with solutions Open app
AP EAMCET202125 Aug 2021Evening ShiftPhysicsAlternating CurrentActual

An AC source of angular frequency is fed across a resistor R and a capacitor C in series. The current flowing in the circuit found to be I . Now the frequency of the source is changed to 3 , (maintaining the same voltage) the current in the circuit is found to be halved. What is the ratio of reactance to resistance at the original frequency?

Options

  1. A5 7
  2. B3 4
  3. C3 5
  4. D7 5

Correct answer

C. 3 5

Step-by-step solution

At angular frequency , current through resistance R and capacitance C is given by I_ rms = V_ rms R^2+X_C^2 = V_ rms R^2+ ( 1 C )^2 ...(i) When angular frequency is changed to 3 , then the current becomes I_ rms 2 = V_ rms R^2+ ( 1 3 C )^2 = V_ rms R^2+ ( 3 C )^2 ...(ii) Dividing Eq. (i) by Eq. (ii), we get array rlrl & & 2= R^2+ ( 3 C )^2 R^2+ ( 1 C )^2 & & 4 [R^2+ ( 1 C )^2 ] & =R^2+ ( 3 C )^2 & & 3 R^2 & = 5 ^2 C^2 & & 1 _C & = 3 5 & X_C R & = 3 5 array

Practice Alternating Current on Quantrex Academy →

More from Alternating Current

An electronic device operates at 2 MHz. The oscillating circuit has an inductance 20 10⁻⁵ H. What is the capacitive reactance of the resonant circuit? 2026When a current of 2.5 A passes through the primary coil of a transformer of 200 number turns, the magnetic flux linked with the secondary coil having 400 turns is 600 10⁻⁶ T m^2 . 2026In a given circuit, the instantaneous values of the alternating voltage and current are V = 0.5 (80 t + 3 ) volt and I = 0.5 (80 t) ampere respectively. Find the average power cons 2026A source of alternating emf = ₀ ( t) is connected to a capacitor. Then the instantaneous current in the circuit is: 2026If wattless current flows in an AC circuit, then the circuit is: 2026A solenoid having resistance R = 60 and inductance L = 0.4 H is connected to an AC source V = 100 2 200t . Find the maximum current. 2026In a circuit containing a pure resistor connected to an AC source, 2026A light bulb rated 100 W is connected to an AC source of 220 V, 50 Hz. The rms current through the bulb is 2026 Full Alternating Current list All AP EAMCET PYQs