Quantrex Quantrex AcademyJEE · NEET · NDA PYQs with solutions Open app
AP EAMCET201921 Apr 2019Morning ShiftPhysicsCurrent ElectricityActual

Assertion (A) When a wire of aluminium and another wire of silicon are heated from room temperature to 80^ C , the conductivity of aluminium increases and that of silicon decreases. Reason (R) Aluminium has positive temperature coefficient of resistivity and silicon has negative temperature coefficient of resistivity.

Options

  1. ABoth (A) and (R) are correct and (R) is the correct explanation of (A).
  2. BBoth (A) and (R) are correct but (R) is not the correct explanation of (A).
  3. C(A) is correct but (R) is not correct.
  4. D(A) is not correct but (R) is correct.

Correct answer

D. (A) is not correct but (R) is correct.

Step-by-step solution

Key Idea In nature, metals have positive temperature coefficient and semiconductors have negative temperature coefficient. Aluminium is a metal, so its conductivity decreases with increase in temperature, due to the excessive collision of electron. Whereas, Si is a semiconductor therefore its conductivity increases with increase in temperature. All metals have positive temperature coefficient of resistivity and semiconductor has negative temperature coefficient of resistivity. Hence, assertion (A) is incorrect but

Practice Current Electricity on Quantrex Academy →

More from Current Electricity

The voltage – current graph for a metal wire of uniform area of cross section at two different temp T and T' is shown. Then choose the correct statement: 2026Find the current through the 40 resistor in the given circuit having a diode, three resistors and two cells. 2026A series combination of 'n' cells of emf 'E' and internal resistance 'r' each, are connected across the external resistance 'R'. If the internal resistance 'r' is negligibly small, 2026An electric coil is rated 400W, 200V. It is cut into two equal parts and connected in parallel to the same source of 200V. Calculate the percentage increase in energy produced per 2026A galvanometer of resistance 50 is having 30 divisions and a current sensitivity 10 mA/div. What should be the shunt resistance so that it can be converted into an ammeter of range 2026Current in a conductor is expressed as I = 8t^3 + 3t^2 + 1 , where current I is measured in amperes and time t is measured in seconds. What is the charge that flows through a cross 2026In the given circuit, an ideal voltmeter connected across 6 reads 5V. The internal resistance r of each cell is: 2026A wire of length 1m has a resistance of 20 at 0^ C. It is uniformly stretched so that its length increases by 21%. Assuming the volume of the wire remains constant, the percentage 2026 Full Current Electricity list All AP EAMCET PYQs