Quantrex Quantrex AcademyJEE · NEET · NDA PYQs with solutions Open app
NTA Abhyas JEE Main2020PhysicsCurrent ElectricityPractice

Metal alloys are used for making standard resistance coils because

Options

  1. AThey have high thermal conductivity.
  2. BTheir resistance depend weakly on temperature.
  3. CThey have low thermal conductivity.
  4. DTheir resistance depend strongly on temperature.

Correct answer

B. Their resistance depend weakly on temperature.

Step-by-step solution

Metal alloys are used for standard resistance coils because their resistance depends weakly on temperature.

Practice Current Electricity on Quantrex Academy →

More from Current Electricity

A metal wire of cross-sectional area 0.5 mm ^2 and length 100 m is connected across a battery of e.m.f. 2 V and internal resistance 1 . The density, atomic mass and electrical cond 2026As shown in the figure, the resistance of a galvanometer G can be found by the half-deflection method. Here the resistance R₂ is adjusted such that when the key K is closed the def 2026The stored charge in the capacitor in steady state of the following circuit is ________ C. 2026A moving coil of galvanometer when shunted with 2 , resistance gives a full scale deflection for a current of 500 mA. When a resistance of 470 , is connected in series it gives a f 2026Two cells of emfs 1 V and 2 V and internal resistance 2 , and 1 , , respectively connected in parallel, gave a current of 1 A through an external resistance. If the polarity of one 2026Refer to the circuit diagram given below. The heat generated across the 6 , resistance in 100 second is 100 J. The value of is _______. (Nearest integer) 2026In an experiment to determine the resistance of a given wire using Ohm's law, the voltmeter and ammeter readings are noted as 10 V and 5 A , respectively. The least counts of voltm 2026Under steady state condition the potential difference across the capacitor in the circuit is _______ V. 2026 Full Current Electricity list All NTA Abhyas JEE Main PYQs