NEETPhysicsMechanical Properties of Solids

Match the following

Correct answer

Step-by-step solution

(i) According to Hooke's law within the elastic limit, stress is proportional to the strain. (ii) Shearing strain is defined as angle in radian through which a plane perpendicular to the fixed surface of the cubical body gets turned under the effect of tangential force. (iii) The temporary loss of elastic properties because of the action of repeated alternating deforming force is called elastic fatigue. Hence option (c) is correct.

Practice Mechanical Properties of Solids on Quantrex Academy →

More from Mechanical Properties of Solids

Match List I with List II : List I List II A. Young's Modulus I. d L ( L d ) B. Compressibility II. F L A( L) C. Bulk Modulus III. - 1 P ( V V ) D. Poisson's Ratio IV. -P ( V V ) C 2026 A metallic bar of Young's modulus, 0.5 10¹¹ ~N ~m ⁻² and coefficient of linear thermal expansion 10⁻⁵ ^ C ⁻¹ , length 1 m and area of cross-section 10⁻³ ~m ^2 is heated from 0^ C t 2024 The maximum elongation of a steel wire of 1 m length if the elastic limit of steel and its Young's modulus, respectively, are 8 10^8 ~N ~m ⁻² and 2 10¹¹ ~N ~m ⁻² , is: 2024 Let a wire be suspended from the ceiling (rigid support) and stretched by a weight W attached at its free end. The longitudinal stress at any point of cross-sectional area A   2023 The amount of elastic potential energy per unit volume (in SI unit) of a steel wire of length 100 ~cm to stretch it by 1 ~mm is (if Young's modulus of the wire =2.0 10¹¹ ~N ~m ⁻² ) 2023 Given below are two statements : One is labelled as Assertion (A) and the other is labelled as Reason (R). Assertion (A): The stretching of a spring is determined by the shear modu 2022 A wire of length L , area of cross section A is hanging from a fixed support. The length of the wire changes to L 1 when mass M is suspended from its free end. The expression for Y 2020 Identify the incorrect statement. 2019 Full Mechanical Properties of Solids list All NEET PYQs